How to install the high rain spray hose (GOSEOL)

① Tilt the field prior to make the furrow.

 

② Make the furrow over the titled field which the steel wire can be fixed.

 

③ Make the furrow over the titled field which the steel wire can be fixed.

 

③ Put the middle posts between main posts in the spacing of 5m.

 

④ Connect the steel wire to the end of the furrow in the form of straight line.
※ Connect the wires pulled tightly.

 

⑤ If the posts and wires are installed, fix the ring on the spray hose for connection.
(based on the direction of printed letter)
20160210_104613

 

⑥ Connect the valve at the starting section of the hose which the water is put into.
 ※ After connect the valve, fix to the main posts.

 

⑦ If the installation is completed, conduct the test spraying.
   (Check if the water smoothly comes out, if there is no twisting of hose or if the water is smoothly sprayed out to the end of the hose.)
※ Fully understand the related precautions before the installation is made.