How to lay the low installation rain spray hose (JEOSEOL)

① Tilt the field prior to make the furrow.
② Make the furrow over the titled field.
③ Before installing the spray hose, set up the posts and then fixing the hose.
④ As the hose is to be installed between furrows, lay the hose over the furrows with its printed surface facing upward.
⑤ Plug one end of the hose and fix it and connect the valve at the starting section of the hose which the water is put into.
⑥ If the installation is completed, conduct the test spraying.
 ※ Check whether adequate water pressure, if the water is smoothly sprayed out to the end of the hose.
※  Make sure to read how to use and precautions before installing the rain spray hose.