Types of irrigation rain spray hose (GWANSU)

There are three types of irrigation spray hose.
 – Circle hole hose (o) : There is almost no clogging. All water inside the hose is discharged.
 – Straight line hose (-): It is used when the water pressure is low. As the water is sprayed from the front and rear sides of hose at the same time, there is no difference in the volume of sprayed water between rear and front sides. If the water pressure is lowered, the supply of water may be in the form of water drip.
 – Mixed shaped hole (-. o)  : It has the holes of both circle and straight line shapes. As the control of water pressure is possible, the circle hole hose can spray the water far away while the straight line hole hose can spray the water close to the hose.
①  General type A-1 (circle hole)
The hole is in round shape and made in the diagonal way.
Size Water Quantity(per min) (50m Standard)
0.25mmx30mmx200m 13L
0.25mmx40mmx200m 20L
0.25mmx50mmx200m 27L

 

②  General type A-2 (circle hole)
The hole is in round shape with each hole facing each other.
Size Water Quantity (per min) (50m Standard)
0.25mmx30mmx200m 13L
0.25mmx40mmx200m 20L
0.25mmx50mmx200m 27L

 

③  General type A-5 (circle hole)
The holes are in round shape and made in the diagonal way in pairs.
Size Water Quantity (per min) (50m Standard)
0.25mmx30mmx200m 25L
0.25mmx40mmx200m 30L
0.25mmx50mmx200m 35L

 

④  Straight line hole type
The hole is in straight line shape and made in the diagonal way.
Size Water Quantity (per min) (50m Standard)
0.25mmx30mmx200m 24L
0.25mmx40mmx200m 31L
0.25mmx50mmx200m 38L

 

⑤ Straight line hole type
The hole is in straight line shape with each hole facing each other.
Size Water Quantity (per min) (50m Standard)
0.25mmx30mmx200m 24L
0.25mmx40mmx200m 31L
0.25mmx50mmx200m 38L

 

⑥  Mixed type (straight line hole + circle hole)
This rain spray hose has the circle holes and straight line hole in a way that each faces the other alternatively
Size Water Quantity (per min) (50m Standard)
0.25mmx30mmx200m 40L
0.25mmx40mmx200m 52L
0.25mmx50mmx200m 65L

 

⑦ One-side hole (straight line, circle and mixed)
Size Water Quantity (per min) (50m Standard)
0.25mmx30mmx200m 7L
0.25mmx40mmx200m 10L
0.25mmx50mmx200m 13L
IMG_3443
Size Water Quantity (per min) (50m Standard)
0.25mmx30mmx200m 12L
0.25mmx40mmx200m 15L
0.25mmx50mmx200m 19L
Size Water Quantity (per min) (50m Standard)
0.25mmx30mmx200m 20L
0.25mmx40mmx200m 26L
0.25mmx50mmx200m 32L

As it is made on one side only, it is used when the plants are supported by one supporting line.

 

 ※ The size and spacing of holes can be adjusted depending on the demand of the customers, including 2.5cm, 3cm, 4cm and 5cm.